Which kraftplex type is right for my project?
Our sustainable laser material kraftplex is available in three different types, each in different formats. Get to know kraftplex ST, CL & FO below and learn all about the technical and aesthetic properties of the different types.
Or simply order your free hand sample directly!
What do all kraftplex types have in common?
100% Cellulose
Sustainable softwood from Scandinavia (FSC)
0% Additives
No usage of adhesives or bleaching and binding agents
Secure
Safety confirmed for manufacture of children's toys according to DIN standard
Sustainable
Resource-saving production, short transport routes, recyclable
Laser cutter suitable
Filigree cutouts, clean engravings, less smut & filter friendly
Flexible & Breakproof
Deep drawing, upsetting, edging and embossing possible with high break resistance and tear strength
Surface Design
Treatable with all products suitable for wood: Lacquers, oils, waxes, chalk paints and many more
Easy Printability
Plate direct printing and UV printing suitable, good flatness on the printer
What is special about kraftplex ST FO CL ?
Which kraftplex type is suitable for your project depends on various factors.
The three kraftplex types differ in terms of strength, material thickness, format and surface.
You will always receive kraftplex in its untreated form. This gives you complete freedom of design.
kraftplex ST
kraftplex FO
kraftplex CL
kraftplex ST stands for “stiff”. The material is a bit firmer than the other kraftplex types.
- It is available in thicknesses of 1.0, 1.5 and 3.0 mm in the formats 56 x 34 cm and 80 x 50 cm.
- The surface has a light screen structure with a matte look.
- Special formats can be requested from a minimum order quantity of 100 m2.
kraftplex FO stands for “formable”. The material is more flexible and pliable than ST.
- It is available in the thickness 2.0 mm in the format 40 x 30 cm.
- The surface has a very fine structure and a smooth look.
- Special formats up to 131 x 100 cm can be requested individually.
kraftplex CL stands for “curve”. The material is particularly flexible. It can be cut with scissors.
- It is available in a thickness of 0.5 mm in a 40 x 30 cm format and in a thickness of 0.8 mm in a 56 x 34 cm format.
- The smooth surface is calendered.
- Special formats up to 131 x 100 cm can be requested individually.
kraftplex ST
Material: 100% unbleached cellulose fiber, pressed, without the use of adhesives and binders.
Raw material: softwood (FSC)
Thicknesses: 1.0 / 1.5 / 3.0 mm
Stock formats: 56 x 34 cm / 60 x 30 cm / 80 x 50 cm
Special formats: Cut to size from 100 sqm up to 315 x 160 cm
Surface: light screen structure
Density: 1,0 – 1,30 g/cm³
Strength: ST stands for “stiff”. This kraftplex type has the highest density and is therefore the most rigid. Especially in the two smaller thicknesses it is still easily bendable and break-proof.
Processing: optimally suited for cutting and engraving with the laser cutter. Paintable and printable.
Tolerances: Material thickness: +/- 7.5%; length and width: < 2%.
Certification: DIN EN 71-3 (no toxic substances contained, suitable for children’s toys.)
Fire protection class: DIN 4102-B2, upgrade to B1 with approved fire retardants.
kraftplex FO
Material: 100% unbleached cellulose fiber, pressed, without the use of adhesives and binders.
Raw material: softwood (FSC)
Thickness: 2.0 mm
Stock formats: 40 x 30 cm
Special formats: individual cuts up to 131 x 100 cm board size possible on request
Surface: very fine structure, smooth appearance
Density: 1.0 – 1.30 g/cm³
Strength: FO stands for “formable”. This kraftplex type exhibits high flexibility combined with high resistance to fracture.
Processing: optimally suited for cutting and engraving with the laser cutter. Paintable and printable.
Tolerances: Material thickness: +/- 7.5%; length and width: < 2%.
Certification: DIN EN 71-3 (no toxic substances contained, suitable for children’s toys.)
Fire protection class: DIN 4102-B2, upgrade to B1 with approved fire retardants.
kraftplex CL
Material: 100% unbleached cellulose fiber, pressed, without the use of adhesives and binders.
Raw material: softwood (FSC)
Thickness: 0.5 / 0.8 mm
Stock formats: 40 x 30 cm in 0.5 mm / 56 x 34 cm in 0.8 mm
Special sizes: Individual cuts up to 131 x 100 cm board size possible on request
Surface: smooth, slightly calendered surface
Density: 1.0 – 1.30 g/cm³
Strength: CL stands for “curve” and “light”. This kraftplex type is particularly flexible, pliable and rollable, with good resistance to breakage and tearing.
Processing: optimally suited for cutting and engraving with the laser cutter. Also suitable for cutting with scissors. Paintable and printable.
Tolerances: Material thickness: +/- 7.5%; length and width: < 2%.
Certification: DIN EN 71-3 (no toxic substances contained, suitable for children’s toys.)
Fire protection class: DIN 4102-B2, upgrade to B1 with approved fire retardants.